Posted on

Amplifier Gain Setting – Introduction

Amplifier Gain Setting introduction

Have you ever said any of these things about amplifier gain setting?

  • I set it to halfway
  • It wasn’t even turned up all the way!
  • I didn’t even touch it
  • It’s supposed to be louder than that

Disclaimer: Before you get into this, please understand I do not know your individual skill level. This is a primer to a topic that brings in a lot of science, and the science is not going to be discussed in depth. This is skimming the surface. Got it? Good. Let’s go.

Why does this thing we call Setting Gains even matter? 

The purpose of an amplifier gain setting is to match the input range of the amplifier to the output voltage of the source unit.

Why? The thing we get to listen to by hitting Play starts as sound waves, which are changed into electricity, which eventually get changed from electricity(we will measure this as Volts) back to sound waves.

Back to gain setting. The source unit is the radio. Output from the radio goes to the input section of the amplifier. 

The output voltage swings up and down as we adjust the volume setting of the radio, and also as the program(music, talk radio, podcast, etc.) changes in loudness. 

We know the bottom of the range. That’s Volume at ‘0’ or when the music is paused. The top of the range can be assumed to be 3/4 of maximum. That’s for the output of the source unit

The input of the amplifier is also adjusted. When the gain setting is too low you’re going to run out of volume, or the bass won’t get as loud as you think it should. 

A Note About Loudness

Turning the gain knob to the right makes the sound louder. This is similar to the result of turning up the volume at the radio. We are doing different functions. The gain knob is not the volume setting of the amplifier.

gain knob on amplifier
Another label for amplifier gain setting might be ‘Level’.

Rob Haynes, Product Training Specialist at JL Audio in Miramar, FL, explains the four primary reasons we must have a repeatable and accurate method for amplifier gain setting. This might also be called the Input Sensitivity setting.

  1. Optimize performance from the amplifier without excessive clipping
  2. Reduce distortion
  3. Improve sound quality
  4. Avoid damaging the speakers

The following video gets right into some technical terms and it assumes you already have experience of successfully installing car audio amplifiers and the use of basic tools that are shown in the video. If you want free step-by-step guidance, and you’re on Facebook, now is the time to join our group Students of Mobile Audio.

Top 3 Gain Setting Methods (in no particular order)

  • By ear with music
  • By combining tone test tracks and a digital multimeter (set to measure volts).
  • Use tone test tracks and an oscilloscope

I’ve done it all three ways with success. Each method must include reference quality test tracks so you or a technician can go back at any given time and get things back in alignment. Turning the knob up halfway is not a method I will endorse. That’s guessing.

There have been many sources of reliable test tracks for audio systems over the years. One that came up as a free download is Focal Tools CD

Focal Tools CD
Focal Tools CD

Advanced amplifier gain setting

  • Balancing multiple amplifiers
  • What to consider in low power versus high power amplifiers
  • Clipping indicator lights and other in-built amplifier setting aids
  • How much clipping is too much?

Would you like to contribute your own amplifier gain setting article? Ask me how to be a guest author!

Barry Schanz
Rubyserv
Schedule a Meeting Now
sales@rubyservsales.com

One thought on “Amplifier Gain Setting – Introduction

  1. […] Amplifier Gain Setting – Introduction […]

Comments are closed.